: SS 316 semi
ellipsoidal size pan with a circular mouth for charging & discharging of
tablets Pan mounted at an inclination of 45 degrees to the horizontal.
: Consists of a suitable HP 3 Phase, 440 V, 1440 RPM
TEFC motor with suitable worm reduction gear box and cone pulley arrangement
to give three speed output.
Hot Air Blower
: The unit is provided with a hot air blower
consisting of suitable HP 3 Phase 440 V, 2880 RPM TEFC electric motor &
centrifugal blower with damper delivering required CFM. The air is heated by
means of suitable electric heater to give air at 30 to 90 degrees Heater
with thermostat control and flexible hose pipe.
: Unit provided with suitable control panel with
starters and push button to actuate the drive and for blower The circuits
consists of MCCBs, relays and contractors in series Ample overload
protection is provided by the MCCB and the relay Wires coming out of the
connections are numbered for easy recognition.
: The motor and gear box is mounted inside sturdy MS frame
and the pan mounted on the Gearing housing fitted in the stand. Blower
mounted by the side of the stand or placed in remote location if required.
: All joints argon Arc welded and all SS Parts polished to
suitable finished required of pharmaceutical equipment MS parts painted to
Options Available :
Technical Specification :
- Unit with FLP motors and FLP push button station but non FLP panel to
be mounted outside FLP area,
- Unit in SS 316 quality contact parts,
- Unit with SS304 cladding / for GMP model and
- Steam heating for blower.
|Drive Motor HP 3 PH 50 C S 415 V AC line
|RPM of Pan (empty)
||24 / 72
|Hot air blower motor HP 3 PH 50 C/S 415 V AC line
|Blower capacity Maximum CFM