Auger Machine is manufactured with high degree of precision to handle diverse type of powered products like custard powder, Roasted ground coffee, spices, talcum powder, detergent powder, pharmaceutical powders, dyes and coloring agents powders, distemper powder, pesticides etc.

High accuracy of this filling system is achieved due to accurate design of Auger Screw, very sophisticated clutch brake and micro processor control system.

Salient Features

• Fluid bed dryer offers uniform, fast and consistent drying
• Fluid bed dryer is easy in material handling
• Fluid bed dryer has one piece CGMP construction
• Fluid bed dryer has electrical/ steam heating batteries
• Explosion flap for high pressure relief
• Laboratory models of fluid bed dryer are available in 5, 10, 15kgs capability
• PLC control on panel board (Optional)

Rapid mixer granulator is a very precision machine performing dry mixing and wet granulating in the same Bowl in only 6 to 12 minutes. The entire operation of rapid mixer granulator is fully automatic, including the discharge. All parts coming into contact with the material to be mixed are made of Stainless Steel and are highly polished. Drive motors and electrical control gear mounted on the rapid mixer granulator machine can be flame proof. In such case separate control panel should be located in a low risk area.

The rapid mixer granulator machine is made in 8 different sizes from 25 litres to 1000 litres. Select the size of the rapid mixer granulator machine according to your batch size. The capacity of say 250 litres working capacity. The rapid mixer granulator vessels overflowing capacity is 375 litres i.e. 50% additional. The capacity in terms of weight shall be 125Kgs of wat granules, i.e. Half of volume capacity assuming bulk density as 0.5.

By using a two stage housing at the main impeller, along with air purging wherever required, entry of powder from vessel to brgs. Housing or entry of grease from Ball bearing to the powder content is totally prohibited. Similar principle is used for chopper housing too.

Features

• Less Handling of materials and therefore less impurities, reduced losses and more hygienic.
• Short cycle time, small floor space and only one operator and therefore very high productivity.
• Almost evenly sized granules.
• Wide range of applications-light formulations to heavy slurries.
• Minimum liquid input and hence less drying time.
• Low headroom.
• All parts easily accessible for cleaning and maintenance.
• in rapid mixer granulator steam jacketed drying can also be provided on specific request.

Technical Specification

Multi Mill is widely used for wet and dry granulation, pulverisation etc., in pharmaceuticals, Chemicals, Cosmetics, Ceramics, Colors, Dyestuff, Food products etc. Multi mill also finds application in Pesticides, Fertilizers, Spices, Detergents, Insecticides, Plastics and Resins Industries.

Salient Features of Multi Mill :

• In multi mill direction of beaters can be changed by reversible switch from knife to impact forward and vice-versa.
• All contact parts of the multi mill can be easily and quickly dismantled and cleaned. Multi mill machine is designed for continuous operation.
• Multi mill has cylindrical screen for higher output
• In multi mill castors provided for mobility.
• Flame proof Electricals can be provided at extra cost.
• Beaters and scrapper blades of SS 304 quality.

Mass Mixer has been well- designed to facilitate through Mixing of door damp materials and mass mixer is specially suitable for tablet granulation.

Technical Specification

• Cone Blender are made out of stainless steel of S.S 316/304. In cone blender barrels are cone shaped for efficient mixing. Cone blender is easily cleaned, uses low power consumption with digital timer.

Application
Ribbon Blender with their multi fold action ensures economical and dependable thorough mixing of wide variety of products in minutes. Ribbon blender are used in leading processing plants, pharmaceutical, food and plastic Industries for mixing of dry powder and pastes.

Salient Features

• In ribbon blender inner and outer helical ribbons are accurately proportioned and oppositely pitched to prevent localized material accumulation.
• In ribbon blender final product homogeneity assured
• Outboard bearings in rugged cast steel housing
• Fabricated in any specified materials of construction.
• Ribbon blender is completely dust proof, leak proof design
• Wide range of models to choose from tailor made designs also available
• A quick hand-operated central of side damper discharge valve.
• Drive and speed reduction with motor and gear box of reputed make
• Ribbon blender has optional jacketed design available for heating or cooling application.
• Optional liquid spray nozzle arrangement for efficient introduction of liquid additives
• Optional vacuum service design also available. Optional drive with chain and sprocket.